How to solve the deformation of anticorrosion wood
The anti-corrosion wood itself is very good, favored by many people, such as strength and density are very high, can save a lot of trouble in use, and decoration in the use of wood, because the wood preservative through special processing, so the natural texture is very clear, very beautiful. But we can see behind these advantages. Because the body of antiseptic wood is wood, so it will inevitably encounter problems such as cracking and deformation. So how do we solve this problem?
Why do they crack and deform?
Wood deformation is mainly due to internal pressure, while wood cracking is the problem of wood surface. But the ultimate reason for cracking and deformation is wood moisture content. Because wood is made up of annual rings, but if the age of plates is not equal, the response to moisture is different.
In general as long as wood, will be the case, a lot of people are worried about their purchase of wood preservative materials, but the deformation and cracking of the, you know, this is the most can hardly be avoided, so we should pay attention to the problem is how to effectively prevent deformation and cracking.
Bijie anticorrosive wood can prevent the occurrence of deformation and cracking of anticorrosive wood
As we all know, preservative wood can be used for a long time when it is used for a long time. So how can enterprises do it? Of course, we should pay attention to some preservatives. Although the performance of anticorrosive wood itself is very tough, but if long time exposed to wind and rain, these properties are difficult to maintain. So generally speaking, first of all, apply a good preservative, put a lot of water into the wood. After that, we should pay attention to the problem of moth and solve this problem, so as to make sure that the use period of the antiseptic wood is very long.
Of course, when maintaining the preservative wood, we should also notice that in some cases, it is not necessary to start doing the work at the very beginning, but not to do the work behind it, which is certainly not the case. We should know that regular maintenance is the most important thing that the enterprise should do. Generally speaking, it is best to check once a half year or a year to see what the actual situation of the current antiseptic wood products is. After that, we do different maintenance work for different problems, so as to ensure the actual result of the work. Guizhou antiseptic wood manufacturers are here today. If there is something wrong here, we can come to our company to understand the situation.