Wood floor maintenance must know knowledge
As life becomes more and more prosperous, the outdoor terrace is more and more willing to spend money, and the idyllic terrace is paved with antiseptic wood floors. Wood preservative is very common in today's living environment, wood preservative is commonly used in outdoor landscape or flower, flower pots, boardwalk and platform, balcony etc..
Although the anticorrosion wood is good, if there is no correct installation method and regular maintenance, the service life of the anticorrosion wood will not be long. Guizhou air brick below to explain several points of the installation of anti-corrosion wood and maintenance programs:
1, when setting up the terrace, we try to use the long wood plate to reduce the joint in order to make it beautiful. The 5mm - 10mm gap is left between the plate surface.
2, all connections should be galvanized joints or stainless steel connectors and hardware products, so as to resist corrosion and never use different metal parts. Otherwise, it will rust soon, so that the structure of wood products will be fundamentally damaged.
3, in the process of production and perforation, should be the first to use electric drill drilling and fixed with screws, to avoid man-made cracking.
4, although the treated wood can be bacteria, mildew and termites, but we still recommend you in after the completion of the project, the wood drying or dried on the surface of wood protective paint brushing. The use of outdoor wood special paint should be noted that the first should be fully shaken, after finishing 24 hours of fine weather conditions, so that the coating on the surface of wood film.
5, outdoor wood should be dried outdoors to roughly the same degree of humidity and the external environment construction. Large amounts of wood with water will be used for large deformation and cracking after construction and installation.
6. In the construction site, the antiseptic wood should be ventilated, and the sun should be avoided as much as possible.
7, as far as the construction site is concerned, the existing dimensions of anticorrosive wood should be used as far as possible. If necessary, the corresponding preservatives should be applied on the spot, and all the cuts and holes should be adequately painted to ensure the service life of the anticorrosive wood.